Kit assembly

From ZeroPhone
Revision as of 17:52, 15 August 2018 by Fnux (talk | contribs) (Create the page: initial structure)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Zerophone Assembly Guide (Delta revision)

Resources

There are a few documents you can use to help you assemble your ZeroPhone:


If you get stuck or are unsure about something, feel free to ask for help on IRC (details on the wiki's frontpage).

<fnux> CRImier: there are some "4", "6", "1" connections on the board. Where can I find the references ?
<CRImier> They're not yet documented
<CRImier> R is 10K
<CRImier> C is 100nF
<CRImier> 4 is 47 ohm
<CRImier> B is BC847
<CRImier> F is the P-FET (IRLML6401 or whichever analog you use)
<CRImier> Z is the 5V1 Zener diode (can be omitted)
<CRImier> SS is SS14 (1N5819(
<CRImier> *)
<CRImier> 0 is 0R resistor
<CRImier> 6 (actually, 9) is BAV99/BAW54 (not required either)

Assembbly

FIXME

Keypad

FIXME

Back board

FIXME

Front board

FIXME