The ZeroPhone assembly is split into two major parts:
- SMD (Surface-Mounted Device) components. In a kit, these will be already soldered to the boards.
- THT (Through-hole Technology) components and breakouts. In a kit, these will not be soldered to the boards, but will be supplied as a part of the kit. Note - certain kits won't have all the parts, so you will have to source some parts separately.
Starting with a kit
In a kit, you will have the SMD parts already soldered on. So, just follow the Kit assembly page.
Starting from scratch
There are things that you might have to after/during assembly to fix hardware problems. Check the After-assembly fixes page and see if there are fixes you need to apply to your boards.