Assembly

From ZeroPhone
Revision as of 21:17, 25 April 2019 by Admin (talk | contribs) (Created page with "The ZeroPhone assembly is split into two major parts: * [https://en.wikipedia.org/wiki/Surface-mount_technology SMD (Surface-Mounted Device)] components. In a kit, these will...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The ZeroPhone assembly is split into two major parts:

  • SMD (Surface-Mounted Device) components. In a kit, these will be already soldered to the boards.
  • THT (Through-hole Technology) components and breakouts. In a kit, these will not be soldered to the boards, but will be supplied as a part of the kit. Note - certain kits won't have all the parts, so you will have to source some parts separately.

Starting with a kit

In a kit, you will have the SMD parts already soldered on. So, just follow the Kit assembly page.

Starting from scratch

If you're doing self-assembly, follow the SMD assembly page. After SMD assembly is done, follow the Kit assembly page.

After-assembly fixes

There are things that you might have to do to fix some hardware problems. For that, follow the After-assembly fixes page.